The Brew Cabin

Posted: **Wed Jun 26, 2013 11:50 am**

Im installing a new resin bound permeable driveway( grass to driveway) to meet current regulations i have a few questions so i know what im talking about before i put it out to contractors.
1. is type 1 ok for sub base?
2.what depth should sub base and permeable tarmac be laid?
3. do i need more than 1 course of tarmac if surface coat is resin
4. 90 m2 overall what price roughly?
MANY THANKS

Posted: **Wed Jun 26, 2013 11:54 am**

Welcome along there will be contractors on this site that would be able to give you a price and spec what area are you in as that will help you and the guys near you.

Posted: **Wed Jun 26, 2013 3:14 pm**

Hi, if its the natural stone look you are after, take a look at exposed aggregate concrete.

Posted: **Wed Jun 26, 2013 8:26 pm**

It's all on the main site if you look but as I'm in a good mood....

1) Yes
2) 175-200mm sub-base, AC20 binder at 60mm compacted.
3) No, your single 60mm thickness of AC20 is just fine
4) Price overall, for reduce dig, sub-base, binder and resin surfacing?

The Brew Cabin

New permeable driveway - Resin bound