Page 1 of 1
Posted: Tue Aug 23, 2011 7:32 pm
by -MG-
Hello, I need to raise this gully by approx 200mm to meet the level of my patio. The internal diameter of the gully is 205mm. Can anyone tell me what do I need to do this?
Posted: Tue Aug 23, 2011 8:01 pm
by Pablo
Polypipe do 8inch circular risers that would fit that as do Brett Martin. It's tapered towards the bottom so even if it's not perfect it'll still be snug. Hold it in place with some leanmix concrete.
Posted: Wed Aug 24, 2011 12:49 pm
by -MG-
Thanks for the reply Pablo. As I'm a bit of a novice can I confirm, this is the type of thing I should be getting.....
http://www.toolstation.com/shop....4
Posted: Wed Aug 24, 2011 5:33 pm
by Pablo
That should do the trick but be sure to buy a matching top for it.
Posted: Wed Aug 24, 2011 8:19 pm
by Dave_L
My goodness is there anything toolstation don't sell???
Posted: Wed Aug 24, 2011 10:23 pm
by GB_Groundworks
haha wicked id have just extended the pipe or concreted a pipe in place, didnt know someone made a specific product for it.
Posted: Thu Aug 25, 2011 8:02 am
by -MG-
Pablo wrote:That should do the trick but be sure to buy a matching top for it.
I cant seem to find a top for it, can I just concrete on the existing grid ?
Posted: Thu Aug 25, 2011 5:25 pm
by Pablo
Probably won't be a problem as long as it can be held in place
Posted: Thu Aug 25, 2011 11:22 pm
by Mikey_C
pretty sure that will fit in it I can check tomorrow for you, failing that 80p take a flyer or try it in store.
and no dave nothing they don't sell at all at a cracking price. big fan can you tell.
Posted: Sat Aug 27, 2011 2:35 pm
by -MG-
Fits like a glove!