Page 1 of 1
Posted: Thu Feb 05, 2009 7:47 pm
by seaspray
Does anyone have any idea the difference in cost between cobbles or setts 200mm x 100mm against brick paving per m2, obviously it will vary from area to area it's just a rough guide 
Thanks
Posted: Thu Feb 05, 2009 7:55 pm
by msh paving
somewhere around £15-17 on top off standard block paving,depending on block type and area 
Posted: Fri Feb 06, 2009 9:28 am
by seaspray
I'm actually in the Channel Islands, so I think we have a slightly higher rate here anyway, if I ever get any work done due to the snow and rain..lol
Posted: Fri Feb 06, 2009 10:32 am
by Tony McC
A typical labour rate for coursed sett laying would be 30-50 quid per square metre (even more in that London) for quality work, while laying CBPs would be less than half of that.