Posted: Sat Apr 23, 2011 1:20 pm
Hi,
I am renovating an old out house and am in the proccess of connecting the sewarage pipe for the toilet. The new branch is going into a hepworth IC. I have dug the trench and removed the green stopper (says supersleve on it) from the IC. When I put the 110mm plastic pipe into the IC the fitting doesnt seem very snug. Is there suppose to be an adoptor for the plastic pipe as the green stopper appears a little larger than that 110mm plastic pipe. The existing pipes in the ic chamber are 110 plastic.
Plan was to dig out and get ready for building inspector on tuesday.
Cheers.
Jon
I am renovating an old out house and am in the proccess of connecting the sewarage pipe for the toilet. The new branch is going into a hepworth IC. I have dug the trench and removed the green stopper (says supersleve on it) from the IC. When I put the 110mm plastic pipe into the IC the fitting doesnt seem very snug. Is there suppose to be an adoptor for the plastic pipe as the green stopper appears a little larger than that 110mm plastic pipe. The existing pipes in the ic chamber are 110 plastic.
Plan was to dig out and get ready for building inspector on tuesday.
Cheers.
Jon