Page 1 of 1

Posted: Wed Aug 04, 2010 1:08 pm
by alistairc
I'd like to add two small drains to catch water which is collecting on my monoblock, near the side of the house. At both points there is a guttering downpipe - is it possible to just connect a small drain to the downpipe ?

I'd rather not have to lift the entire monoblock area, and wonder if lifting 3 or 4 blocks to give enough access to put a small plastic drain connected directly to the downpipe would work and be an acceptable way to drain the surface water ?


Thanks,

Alistair C.

Posted: Wed Aug 04, 2010 3:35 pm
by cookiewales
alistairc wrote:I'd like to add two small drains to catch water which is collecting on my monoblock, near the side of the house. At both points there is a guttering downpipe - is it possible to just connect a small drain to the downpipe ?

I'd rather not have to lift the entire monoblock area, and wonder if lifting 3 or 4 blocks to give enough access to put a small plastic drain connected directly to the downpipe would work and be an acceptable way to drain the surface water ?


Thanks,

Alistair C.
why not just put a hopper on drain thats there and feed down pipe in aswell :;):

Posted: Wed Aug 04, 2010 6:19 pm
by lutonlagerlout
if you dont want to lift the blocks you can run down pipe at an angle and round corners
but it looks pants
LLL