Page 1 of 1

Posted: Mon May 31, 2010 4:29 pm
by Murray
I have a house that is on a steep hill on the west coast of scotland. We have a surface water issue which is causing damp on the rear wall of the property.

I'm looking at putting in french drains following our structural engineers advice. I have only found the plastic pipe with holes all over at our builder's merchants.

I thought that I would need a pipe with holes only in the top to absorb water and carry it away.

If I get the pipe with water all over will it still work?

Thanks

Posted: Mon May 31, 2010 7:48 pm
by seanandruby

Posted: Mon May 31, 2010 9:20 pm
by GB_Groundworks
for field drains we use teh perforated all way round pipe works fine