The Brew Cabin

Posted: **Tue May 16, 2006 9:36 pm**

I am installing a WC and washbasin in a single storey building with a concrete floor. A 110mm pipe runs in a trench under the toilet, between your feet as you sit on it, to a 500mm deep mini IC 6 metres directly in front of you. The washbasin is mounted on the other side of a stud partition behind the wc cistern so that the two units are effectively back to back. I would like to connect the basin waste directly into the main 110mm underground pipe. I would be very grateful for advice as to what components would be necessary to achieve the ideal conventional method of connection underground. Is it likely that an air admittance valve would be necessary either in the basin waste or the 110mm soil pipe?
Many thanks, Charlie

Posted: **Thu May 18, 2006 7:59 pm**

You'll probably need an AAV on the soil pipe, unless it's vented to the roof, but the basin watse should be ok. There's a standard plumbing fitting for connecting 40mm waste into 110mm drainage. If you visit a plumber's merchant, they'll be able to show you which is most suitable for the drainage system you have.

The Brew Cabin

The right way to do it - Wc and washbasin underground connection