Page 1 of 1
Posted: Fri Aug 28, 2020 6:33 pm
by rogerp
Hi all.My name is Roger and I have just joined. I had a patio laid in February using Raj blend sandstone measuring 60 sq. metres. I am looking for an 'invisible' sealer which will not change the colour of the stone. Any suggestions.Thanks.
Posted: Sat Aug 29, 2020 4:44 pm
by RAPressureWashing
Personally I don't think you need to seal Indian Sandstone, but if you want to go that route, then Lithofin Stain Stop, just make sure the paving is clean, and thoroughly dry before you start and no rain forecast for around 6 hours after you finish.
Posted: Sun Aug 30, 2020 7:15 am
by rogerp
Thanks Roger.
Posted: Wed Sep 02, 2020 6:43 pm
by Tony McC
If you must seal, then have a look at the Sealant Trials I ran a few years back.... https://www.pavingexpert.com/sealants-for-paving