Posted: Sat Oct 20, 2018 8:14 pm
Looking for help and advice please, I am slightly concerned...
Landscapers are to lay around 110sqm of silver grey granite, the 20mm thick variant. Approximately 30sqm has been laid so far on full beds of building sand / cement mix with sbr and cement mix applied to the back of the pavers before laying.
The problem is they are all patchy / damp looking with some dry and some very dark patches.
What are they doing wrong or is this normal and will they ‘dry’ out in time?
Thank you in advance
P.s grout gap is 2mm if that makes any difference at all
Landscapers are to lay around 110sqm of silver grey granite, the 20mm thick variant. Approximately 30sqm has been laid so far on full beds of building sand / cement mix with sbr and cement mix applied to the back of the pavers before laying.
The problem is they are all patchy / damp looking with some dry and some very dark patches.
What are they doing wrong or is this normal and will they ‘dry’ out in time?
Thank you in advance
P.s grout gap is 2mm if that makes any difference at all