Geofix/marshalls ready mix jointing
-
- Posts: 7
- Joined: Mon Feb 11, 2019 2:06 pm
- Location: London, UK
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
Geoshite. Forget it. I have had great results with easijoint. Or there is marshals 365 weatherpoint. But not geofix
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
Geofix lasts about 6 months, then starts degrading and coming loose. The other two work in a different way, where you brush them in with water and they are air activated.
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
None of the 1-part polymerics are wonderful, but some are truly awful, and GeoFix falls into the latter category.
Use the search button above to look for the term GeoFix and you'll find hundreds of complaints about it from users of this forum over 15 years or more. It's old and failed technology that has never been improved in quarter of a century.
The best 1-part poymerics are just about OK for patio work as long as there'll be no power washing, no over-hanging trees to cover the paving (and jointing) with a bed of leaves each year, and nothing heavier than a child's bike travelling across the pavement.
If it has to be a brush-in resin mortar, then I would only consider a good quality 2-part product, despite the significant price difference (they can be twice as costly, but are at least 10 times better!), or look to use a good quality cement-based slurry mortar, at less than half the cost of a polymeric, and accept the heavy, arduous cleaning that they require.
You pays your money and you takes your choice!
Use the search button above to look for the term GeoFix and you'll find hundreds of complaints about it from users of this forum over 15 years or more. It's old and failed technology that has never been improved in quarter of a century.
The best 1-part poymerics are just about OK for patio work as long as there'll be no power washing, no over-hanging trees to cover the paving (and jointing) with a bed of leaves each year, and nothing heavier than a child's bike travelling across the pavement.
If it has to be a brush-in resin mortar, then I would only consider a good quality 2-part product, despite the significant price difference (they can be twice as costly, but are at least 10 times better!), or look to use a good quality cement-based slurry mortar, at less than half the cost of a polymeric, and accept the heavy, arduous cleaning that they require.
You pays your money and you takes your choice!
Site Agent - Pavingexpert
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 861
- Joined: Wed Feb 27, 2008 9:30 pm
- Location: SE London/ NW Kent
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
I think the good quality 2-part resin slurries are much, much easier to use than the gun mortars. I know they cost so much more, but once you've spent a couple of hours bent over, intensely concentrating on where it's all going with a gun system, that few extra quid seems more than worth it!
Site Agent - Pavingexpert
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 861
- Joined: Wed Feb 27, 2008 9:30 pm
- Location: SE London/ NW Kent
Thanks chaps.
Has there been a change over to the use of slurries over the last few years as I seem to remember gunning being really popular on here. Wasn't you trying to formulate your own gun mix at one time LLL?
The Rompox Easy had put me off slurries, I take it these 2 parts mixes are much superior?
I originally contemplated gunning as I intended to do the job in sections, get a section of old pointing out one day and fill it another day, then move onto another section. I'm winding at work and have gone part time so have plenty of time on my hands
Has there been a change over to the use of slurries over the last few years as I seem to remember gunning being really popular on here. Wasn't you trying to formulate your own gun mix at one time LLL?
The Rompox Easy had put me off slurries, I take it these 2 parts mixes are much superior?
I originally contemplated gunning as I intended to do the job in sections, get a section of old pointing out one day and fill it another day, then move onto another section. I'm winding at work and have gone part time so have plenty of time on my hands
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire