Posted: Mon Jul 23, 2018 10:21 am
Hi all
I had grey granite slabs laid in December. We decided to grout despite the temperature to avoid weeds etc. Predictably enough the grout did not set properly and bled all over the slabs leaving a grey film on them.
After talking with the company who I purchased the slabs from I used brick and patio cleaner on the worst affected areas. (The grout had finallly set)
https://www.everbuild.co.uk/product/401-brick-and-patio-cleaner/
This seemed to go okay but when I applied the sealer I have been left with areas that seem to have a darker sticky looking patch. It's quite similar to the pictures in the thread on the link below but perhaps not as bad probably because Granite is slightly more durable than the sand stone.
https://www.everbuild.co.uk/product/401-brick-and-patio-cleaner/
However, it certainly isn't the finish that I'm after and i'd be grateful for any solutions.
I had grey granite slabs laid in December. We decided to grout despite the temperature to avoid weeds etc. Predictably enough the grout did not set properly and bled all over the slabs leaving a grey film on them.
After talking with the company who I purchased the slabs from I used brick and patio cleaner on the worst affected areas. (The grout had finallly set)
https://www.everbuild.co.uk/product/401-brick-and-patio-cleaner/
This seemed to go okay but when I applied the sealer I have been left with areas that seem to have a darker sticky looking patch. It's quite similar to the pictures in the thread on the link below but perhaps not as bad probably because Granite is slightly more durable than the sand stone.
https://www.everbuild.co.uk/product/401-brick-and-patio-cleaner/
However, it certainly isn't the finish that I'm after and i'd be grateful for any solutions.