The Brew Cabin

Posted: **Wed Jun 13, 2018 6:10 am**

Hi there,

I am laying a patio which is around 40m2, (180 450x450 slabs) as I work full time I am doing this in my spare time, roughly I am managing 12/20 per week, Although Iâ€™ve taken a week off work in a few weeks to try and get the majority done. Basically my question is should I be jointing as I go or wait until iâ€™m fully finished. I imagine it would be best in an ideal world to joint all in one go but Iâ€™m worried about debri getting into the joints.

Any advice would be welcomed.

Thanks

Chris

Posted: **Thu Jun 14, 2018 8:06 am**

it depends what you are jointing with Chrisy
if you are using a resin mortar you can do bits
but if its sand and cement it would be best to do it in 1 hit to avoid different batch colours
try and gauge the sand and cement if using that method so you get an even colour
cheers LLL

Posted: **Thu Jun 14, 2018 8:11 pm**

Thanks for your reply, appreciate it.

The Brew Cabin

Advice re jointing in stages or not - Jointing advice