Using easy joint instead of kiln dried sand

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
Post Reply
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 113993Post Forestboy1978

Almost finished laying a brett textured patio. All butted up.

Was going to brush in kiln dried sand but I was wondering if I could use easy joint so it could be jetwashed without blasting out the sand.

Would the easy joint get into the small gaps here and there you reckon?
Top
mickg
Posts: 2598
Joined: Wed Apr 08, 2009 8:01 am
Location: Peoples Republic of Westhoughton
Contact:
Contact mickg

Post: # 114009Post mickg

The only product to use with gaps so small is kiln dried sand as easy joint needs a minimum gap of 3mm ... other resin based jointing products need more
Crystalclear
Driveway and Patio Installer

Call us today
01942 840109
7 days a week 8am till 8pm

Driveways Patios and Paving Specialists
Driveways
Top
Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:
Contact Tony McC

Post: # 114019Post Tony McC

The GftK 815 will work in 3mm joints.....and it laughs at pressure washers!
Site Agent - Pavingexpert
Top
Post Reply

Return to “Flags and Slabs”