Page 1 of 1

Posted: Sun Jun 04, 2017 3:09 pm
by Fife Lass
We laid black limestone paving in June/July 2016 and it has taken until now (June 2017) for all the efflorescent and unsightly marks to disappear. All the paving is now the same colour ( a kind of steel grey) and we now want to use a sealant on it all as every time it gets a mark on it or there is bird droppings I have to wash it all with hot soapy water.

Reading the forum last year you mentioned Aqua-Mix Enrich & Seal or Miracle 511 Seal & Enhancel. Both are Impregnator sealants suitable for black limestone. Would you still recommend these products?

Looking online, the Miracle 511 Seal & Enhance seems the easiest to obtain (from Amazon) at £77.90 for 946ml.

Our paving covers approximately 14sq.mt. Would 946ml be enough for two coats? I haven't seen a larger quantity online.
Thank you for your help.
???

Posted: Sun Jun 04, 2017 11:27 pm
by lutonlagerlout
just shy of a litre should cover 14 metres
LLL

Posted: Tue Jun 06, 2017 3:13 pm
by RAPressureWashing
You won't get Aqua-Mix anymore they pulled out of the UK about 18-24 months ago, the Miracle 511 Enhance & Seal is excellent for Black Limestone, you should only need to do one coat, you can also get it from here, these are the importers of Miracle products
http://www.tilinglogistics.co.uk/

Posted: Tue Jun 06, 2017 4:49 pm
by Fife Lass
Thanks Pressure Washer for the link to Tiling Logistics. I've ordered 946ml and an applicator for less than Amazon wanted for just the Miracle 511. Now all I need is so many dry days before we can apply it to the paving. Try and get a week here without it raining at some point is nigh on impossible huh.