The Brew Cabin

Posted: **Sat Aug 18, 2007 11:04 pm**

Hi,

I was at Barton Fields Patio Centre earlier and came across what looked like a black limestone paver, around 200 x 100 x50, with sawn edges and one face slightly bush hammered and the other with a ribbed surface finish.

Unfortunately they didn't seem to sell these pavers which would be perfect for an edging. It looks like a rep had previously left them.

I've searched all over the web but can't seem to find anything similar.

If anyone has seen anything which matches the above description then I would appreciate any information.

Many thanks for any help you can offer,

Damian

Posted: **Sat Aug 25, 2007 2:47 pm**

They'll probably be one of the products from Natural Paving, as that company has good links with Barton Fields. Their website might be a good place to start, or give them a call on 0870 242 3018

Posted: **Sun Aug 26, 2007 9:31 am**

Hi Tony,

Thanks for the reply.

These pavers are a discontinued line from Natural Stone Paving but hopefully a will be able to get hold of some to meet my needs.

I am hoping that I will be able to core drill some 30mm holes in these pavers - will I be okay with a TCT core drill and black limestone?

Thanks again,

Damian

Posted: **Sun Aug 26, 2007 10:49 am**

A core drill should be fine

The Brew Cabin

Black limestone pavers