Page 1 of 1
Posted: Thu Jul 16, 2015 11:06 pm
by Paving expert
hi there tony I've recently layed a patio with unacalabrated 600x600 slate slabs but had nothing but problems as the varieation in thickness just in one slab could vary from 10 - 40m I layed them on a strong sharp sand and cement mix (wet) as I don't like doing dot and dab as you get voids under the slabs .and I've had to to back a few times to sort some rocking ones just wondering if you have any advise as I don't usually have any problems with rocking slabs useing this mix
Posted: Fri Jul 17, 2015 9:31 am
by Tony McC
Posted: Fri Jul 17, 2015 11:15 pm
by Paving expert
What is a good bond bridge slurry to get and can you get it from any builders merchants 
Posted: Sat Jul 18, 2015 8:23 am
by seanandruby
Make sure you get SBR and not it's ugly sister PVA. Any of the big sheds stock it , i know there is a wickes on your industrial estate. Glad your not D&Ding, hanging offence on this site.
Posted: Sat Jul 18, 2015 6:12 pm
by Paving expert
Fair point mate but wen I signed up I thought it was just a user name to sign in with 
Posted: Sat Jul 18, 2015 6:33 pm
by seanandruby
Only having the craic, lot of piss taking goes on, i get my fair share. Did you sort out the SBR?