The Brew Cabin

Posted: **Thu Jul 09, 2015 7:25 pm**

Hi all, I'm ready to point my patio and have 2 tubs of 365.
my slabs are sealed very well, I understand water is needed to avoid the 365 staining the slabs, however I'd rather not make a huge mess, as my slabs are well sealed can i mildly wet the area and instead of pouring it all down and sweeping in with a broom over the while area, can I just work smaller sections at a time using say a dustpan brush?
Many thanks

Posted: **Thu Jul 09, 2015 8:19 pm**

NO, it has to bee soaking wet to work properly, it has nothing to do with staining,it does not make a huge mess at all,what do you mean by well sealed? MSH

Posted: **Thu Jul 09, 2015 10:17 pm**

Hi mate. My slabs have been pre sealed prior to laying with aqua mix 2 coats, ok thanks so the water is to help it flow and activate it?

Posted: **Thu Jul 09, 2015 10:36 pm**

for it to work it has to be sopping wet deegan
someone with a hosepipe on mist at this time of the year while you sweep it in works well
LLL

Posted: **Thu Jul 09, 2015 10:38 pm**

Cheers dude, so doesn't matter if the joints fill with water?

Posted: **Fri Jul 10, 2015 6:28 am**

nope,, wetter the better, you cant over water it MSH

The Brew Cabin

Weatherpoint 365 tips - About to apply