The Brew Cabin

Posted: **Fri Jun 12, 2015 5:47 am**

I have put down 100+ granite 900 x 600 x 20 mm slabs on a full grit a building sand mortar bed and I'm looking to use a resin pointing product eg Romex easy. Most of these products specify a 30mm minimum depth and my depth is 20mm x15 mm wide. Can I use these products? Any help appreciated.

Posted: **Fri Jun 12, 2015 7:24 am**

I have used Marshalls weatherpoint which is similar with no problems. Use plenty of water to flush the product into the joints.

Posted: **Fri Jun 12, 2015 5:42 pm**

from my personal experience i would say weatherpoint is a superior product to romex easy
LLL

The Brew Cabin

Resin pointing - Can i use it?