Dear All
What would you advise I use to fill large gaps (up to 6cm) in a patio of crazing paving? The paving slabs are sitting on a sand bed which sits on a plant inhibitor sheet (a geotextile) directly on the earth.
I'm obviously worried about it cracking due to movement. If I used a cement, sand and aggregate mix would that be the best (strongest and least likely to crack) option?
Not sure how to attach a photo - can do so if it helps.
thanks in advance for your advice
Graham
Filling large gaps in crazy paving - How to avoid cracking between slabs
-
seanandruby
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
-
grahamalang
- Posts: 2
- Joined: Wed Apr 29, 2015 12:55 pm
- Location: France
many thanks - very comprehensive.
It's pretty clear that I'll need to start again. Take off all the paving slabs and then put down a concrete base and go from there.
I know this is a pain, but I feel it's going to be less of a pain than having to redo the whole lot in a couple years if I continue with my current method
tks again - much appreciated!
It's pretty clear that I'll need to start again. Take off all the paving slabs and then put down a concrete base and go from there.
I know this is a pain, but I feel it's going to be less of a pain than having to redo the whole lot in a couple years if I continue with my current method
tks again - much appreciated!