Posted: Wed Apr 01, 2015 8:21 pm
Hi all
Managed to get approx 180sqm done back in late October just before the weather went bad
I left the jointing for another day which I guess can't be put off for long, choice between cement joints between the Bradstone panache slabs 450 X 450 8mm joints or easy joint jointex in grey
Slabs were laid on full bed of mortar I guess only a handful have loosened
Looked at others Inc Marshall but the cost is more than i can afford for this size area
If I go the cement pointing way any hidden issues I should look out for
due to the delay ,would it be worth putting some sbr into the joint ?
Which type of sand would be best ,I used grit sand for the base
Cheers guys
Managed to get approx 180sqm done back in late October just before the weather went bad
I left the jointing for another day which I guess can't be put off for long, choice between cement joints between the Bradstone panache slabs 450 X 450 8mm joints or easy joint jointex in grey
Slabs were laid on full bed of mortar I guess only a handful have loosened
Looked at others Inc Marshall but the cost is more than i can afford for this size area
If I go the cement pointing way any hidden issues I should look out for
due to the delay ,would it be worth putting some sbr into the joint ?
Which type of sand would be best ,I used grit sand for the base
Cheers guys