The Brew Cabin

Posted: **Thu Apr 25, 2013 8:37 pm**

Hi I have just used this to re do my pointing on my indian sandstone and so far it's looks excellent.

Couple of questions.

After three dry days will I be ok to apply my sealer?

Also I swept the excess into the pebbles at the side of my patio will this go rock hard what should I try and do with it?

Also if I presure wash the patio will it come out?

I tried to get all the excess of the slabs do I need to wash this off in a few days or will it burn off?

Thanks for the help.

Posted: **Thu Apr 25, 2013 9:03 pm**

Do not apply any type of sealer for a least a month and have 3 days of no rain forecast.

Posted: **Thu Apr 25, 2013 10:10 pm**

its not a case of tried to get it off you must get it off the same day you applied it into the joints using a medium bristle or soft brush at a 45 degree angle to the paving joints then using a hose pipe lightly spray the surface which will disperse the small grains which may still be present into the joints

don't seal it for at least 4 weeks if not longer to allow the resin from the weatherpoint to come out of the paving

no the weatherpoint will not come out of the paving joints if its been applied the correct way as per the instruction on the tub

The Brew Cabin

Weatherpoint 365 questions