Page 1 of 1
Posted: Fri Oct 19, 2012 4:26 pm
by JStrong
This is my first post so hello everyone.
I have just taken delivery of 65m2 of Indian Sandstone and wondered if anyone could help with a laying pattern?
I want to avoid coursing if possible! The 3 slab sizes I have are 840x560 560x560 & 560x280 in equal numbers. ???
Posted: Fri Oct 19, 2012 6:35 pm
by Tony McC
Posted: Sat Oct 20, 2012 3:51 am
by lutonlagerlout
are you a pro or DIYer mr strong?
can highly recommend the above service for either
I am surprised that you dont have any small units in your flags ???
LLL
Posted: Sat Oct 20, 2012 9:02 am
by local patios and driveway
Just lay them and make sure you donthave any crosses in the pointing. Job done
Posted: Sat Oct 20, 2012 10:28 am
by JStrong
Hi LLL
I only have the 3 sizes 840x560 - 560x560 - 560x280 unfortunatley. I did see the patio laying service but I'm way over budget and can't afford anymore outlay! Any help on a laying pattern would be really helpful.
Posted: Sat Oct 20, 2012 11:10 am
by local patios and driveway
You will need to pay for the service, for someone to sit down and do the work for free may take hours. Or lay it randomly avoiding crosses in the pointing....
Posted: Sat Oct 20, 2012 11:37 am
by lutonlagerlout
its a patio design service
i dont think 60 quid is expensive really
cheers LLL 
Posted: Sat Oct 20, 2012 11:47 am
by Bob_A
I paid to have mine done (60sq metres)
To be honest my layout was very straightforward and I probably could've done it myself.
But I paid knowing that my design would definitely work, there's nothing worse than having your mix going off while you sit there scratching your head due to some unforessen problem
There are standard layouts you can use for patios (you should be able to find them by googling) but I'm not sure if your 3 sizes of flags you've been supplied are standard