Hi - wonder if anyone can help. We now have some very unsightly Raj Green flags after the builder left the patio uncovered after he'd pointed and it rained. The colour is greyed & washed out, with unsightly mortar "splodges" around the joints. Is there any way to clean the flags?
Many thanks for your help.
*** Links to pictures below.....hope they work....please let me know if not as I've never posted on here before ***
Patio Picture 1
Patio Picture 2
Clean mortar from indian sandstone - Problems after pointing
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
oh dear and it wasnt a big area to cover either
pre wet the area then use hydrochloric acid
try a small piece of off cut first as some stones can react with the acid
clean a flag or two then wash off with clean water
wear all PPE
this means goggles gloves etc
its dangerous stuff
alternatively you could try jet washing but i fear the staining is too bad
LLL
pre wet the area then use hydrochloric acid
try a small piece of off cut first as some stones can react with the acid
clean a flag or two then wash off with clean water
wear all PPE
this means goggles gloves etc
its dangerous stuff
alternatively you could try jet washing but i fear the staining is too bad
LLL
-
- Posts: 8
- Joined: Sun Oct 14, 2012 2:47 pm
- Location: Holmfirth
Thanks LLL. I think you're right about the jet wash - the builder tried it and didn't seem to make it any better. Just another idea - the paving actually looks lovely in the wet as the colours change dramatically and the white-grey mortar virtually disappears (...or maybe goes dark grey-black and is not unpleasant). Not too much a fan of "wet look" sealants, but would something like this or a colour intensifier perhaps change the look to something more pleasant permanently?
-
- Posts: 1568
- Joined: Mon May 10, 2010 9:58 pm
- Location: Gatwick
- Contact:
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
That looks like Fissile Mint - DO NOT use an acid based cleaner: it'll make it all go rusty.
I know it can be hard to believe that Fissile Mint could be any worse, but daubing it with acid is a sure-fire way to completely bugger it. On some light cement stains, Lithofin MN Power-Clean has been known to help, but it's not guaranteed because it's alkaline based.
Time and weather are the best cleaners, but sand/grit blasting is also helpful.
And as others have said, I would be wanting the eejit contractor to pay for all this....
I know it can be hard to believe that Fissile Mint could be any worse, but daubing it with acid is a sure-fire way to completely bugger it. On some light cement stains, Lithofin MN Power-Clean has been known to help, but it's not guaranteed because it's alkaline based.
Time and weather are the best cleaners, but sand/grit blasting is also helpful.
And as others have said, I would be wanting the eejit contractor to pay for all this....
Site Agent - Pavingexpert
-
- Posts: 8
- Joined: Sun Oct 14, 2012 2:47 pm
- Location: Holmfirth