The Brew Cabin

Posted: **Wed Apr 04, 2012 9:32 pm**

Hi,
I am wishing to point a granite patio. I have laid the stones using SBR and OPC over a dry mix base.

My question is, do I need to use the bonding mix between the slabs so that the pointing mortar bonds to the granite?

I assume if I don't then moisture could get down between the granite surface and the pointing.

I would like to use the easipoint standard mortar and a gun, but can find no stockists locally (joints are 1cm).

Any help gratefully received.

Posted: **Wed Apr 04, 2012 10:01 pm**

london stone paving can supply easipoint . next day delivery.i bought a gun off ebay think it was about 17 quid with the nozzles etc . asda was cheapest at time for the plastic tub for mixing . be carefull the natural colour drys very grey . great stuff to use . goes like iron after a few hours . i used the jetwash on the patio the next day not a bit come out.

Posted: **Wed Apr 04, 2012 10:58 pm**

as above bomb proof

Posted: **Fri Apr 06, 2012 8:04 am**

Hi,
Thanks for the reply about easipoint.

However I am still unsure if I need to use a bonding mix (SBR + OPC) for ordinary mortar pointing. The granite slabs have very smooth sides and bases. I had to use the bonding mix for laying as even a wet concrete mix did not adhere to the slabs.

Posted: **Fri Apr 06, 2012 9:03 am**

i would not use sbr in pointing as it has a tendency to stain
easipoint can be ordered for next day delivery but you need to be really careful with it
LLL

The Brew Cabin

Pointing granite slabs