Page 1 of 1
Posted: Mon Jan 09, 2012 11:10 pm
by London Stone Paving
Cant quite believe it, i must have made dozens of posts on this website about the dangers of using chemicals on Indian limestone. Set my guys the task of giving the display a bit of a clean. They were struggling to remove some dirt from the grout gaps in the kota blue limestone when one of my helpful customers pulled up and saw them struggling, decided toget a tub of acid out of his van and give them a hand. Result is that the kota blue now looks like a blue sky complete with heavy cummulus cloud cover. Will post some shots tomorrow
Posted: Tue Jan 10, 2012 7:05 am
by lutonlagerlout
anyone can make a mistake
once
any way of rectifying?
LLL
Posted: Tue Jan 10, 2012 7:16 am
by mickavalon
There you go Mate, just market them as "Sky Blue", sorted. I've got about 10m2 lying around the yard, that we had to replace for a customer who's Brickie used Acid cleaner, to clean some mortar stains off a Patio we'd done. His Brickie, who was Bricking up a Doorway for him, made the mess while we were a way for the weekend, and then denied doing it when we came back on the Monday, actually said he'd been nowhere near it. He used our sand, our mixer, and ruined about 10m2 of new Paving, and then refused to sort it. So you can have that to add to yours and sell it.:p
Posted: Tue Jan 10, 2012 7:20 am
by London Stone Paving
lutonlagerlout wrote:anyone can make a mistake
once
like your style Tony
Posted: Tue Jan 10, 2012 7:30 am
by London Stone Paving
Not a bad idea that Mick.
The cost of rectifying is very expensive. We supplied some black limestone to a customer up near Gerrards Cross and we got a call from the client a month later saying the paving had gone all bloomy. I went for a look. I had a suspicion that the builder had used some chemicals to clean it with, but the client insisted that was not the case. She was requesting that we pay for a full re-lay. Roger went down to take a look and pretty much concurred that some chemical had been used. It also looked like it had been sealed the day before a huge downpour which made matters worse. Roger could repair it but it involved stripping off the whole surface layer of the stone and re-sealing. In the end thats what the client did, but as i said not a cheap solution.
Posted: Wed Jan 11, 2012 9:50 am
by RAPressureWashing
London Stone Paving wrote:Not a bad idea that Mick.
The cost of rectifying is very expensive. We supplied some black limestone to a customer up near Gerrards Cross and we got a call from the client a month later saying the paving had gone all bloomy. I went for a look. I had a suspicion that the builder had used some chemicals to clean it with, but the client insisted that was not the case. She was requesting that we pay for a full re-lay. Roger went down to take a look and pretty much concurred that some chemical had been used. It also looked like it had been sealed the day before a huge downpour which made matters worse. Roger could repair it but it involved stripping off the whole surface layer of the stone and re-sealing. In the end thats what the client did, but as i said not a cheap solution.
Steve,
As you know I did the strip before xmas, so should be resealing later this year when conditions are right, hopefully they won't test anymore products on the paving while we wait!!!!
The other one in Whitton is going ahead in May, the one where the builders have messed up doing the extension.
Posted: Thu Jan 12, 2012 2:35 pm
by London Stone Paving
Pictures of the kota blue limestone recently ruined
Posted: Thu Jan 12, 2012 2:56 pm
by RAPressureWashing
Steve,
You should be able to flaten out the acid marks with a Limestone restorer. You would need to re-seal the paving with a colour enhancer sealer to get the depth of colour back though.
Posted: Thu Jan 12, 2012 5:33 pm
by London Stone Paving
Its only 8m2 Roger, be quicker just to relay it
Posted: Fri Jan 13, 2012 11:22 am
by lutonlagerlout
to add to the theme of fails i went out this AM to be greeted by a heavy frost
usually i use a kettle of water but today i just picked up a piece of slate and scraped it off
you know the rest
FAIL
LLL
Posted: Fri Jan 13, 2012 7:19 pm
by DNgroundworks
Oh dear Tony, i did the same last year, used a brick trowel, so the glass is scratched to fook then?
Posted: Fri Jan 13, 2012 9:11 pm
by lutonlagerlout
well dan,put it this way
I now know that slate is harder than glass
wnacker
LLL 