The Brew Cabin

Posted: **Sat Sep 10, 2011 12:51 pm**

Paving a driveway, would you use plasticiser in the 'wet mix' or not.

Posted: **Sat Sep 10, 2011 1:13 pm**

what kind of paving are you using and what's your construction method.

Posted: **Sat Sep 10, 2011 6:00 pm**

Indian sandstone to be laid over 50mm compacted granular layer over 150mm compacted mot type 1.

Posted: **Sat Sep 10, 2011 6:07 pm**

No good is that method on a driveway, flags need laying in a minimum of 100mm mass concrete preferably with a bond bridge, or the power steering and traffic movments will just ruin it in no time.

Whats a 50mm compacted granular layer?

Posted: **Sat Sep 10, 2011 6:30 pm**

I have laid a 150mm compacted layer of mot type 1 and then a further 50mm of compacted stonedust. I was going to then lay sandstone paving on a 75-100mm of wetmix mortar but i do not want to compromise the strength of the mortar by using plasticiser (is plasticiser a good idea or will it weken the mix?)

Posted: **Sat Sep 10, 2011 6:34 pm**

Ah get you now, i wouldnt use plasticiser, no point, if anything id use SBR. Id use a concrete mix using 10mm ballast though not just straight sharp sand.

Posted: **Sat Sep 10, 2011 6:37 pm**

Thanks Ganger, sounds good to me. Just a thought, what about a stonedust & cement based 'mortar'

Ta

Posted: **Sat Sep 10, 2011 6:45 pm**

I wouldnt know pal, but ive had some "barrow mix" concrete before and im sure they used some crushed lime shite for the aggregate and the strength was comparable to lets say soggy digestive biscuits - crap!

Posted: **Sat Sep 10, 2011 7:02 pm**

Thanks Ganger

Posted: **Sat Sep 10, 2011 7:09 pm**

No probs.

The Brew Cabin

Plasticiser or no plasticiser? - Plasticiser or no plasticiser?