Page 1 of 1
Posted: Mon Jun 27, 2011 7:09 pm
by ilovesettsonmondays
hi,customer on job im doing has decided to go with easipoint white for his pointing . havent used a gun for about 5 years , last time was when i worked for bardons and easipoint supplied all the gear . whats a good gun to buy . thnx in advance.also how many bags for 75m of 3 size stone
Posted: Mon Jun 27, 2011 7:35 pm
by lutonlagerlout
easipoints guns do the job need 2 tubes though,and a paddle mixer and gorilla bucket and clean water and the mrs measuring jug
roughly 6 bags but i cant see your joint depth or sizes
LLL
Posted: Mon Jun 27, 2011 9:31 pm
by dig dug dan
i would say at least 6, would suggest 8 though!
Posted: Tue Jun 28, 2011 3:04 pm
by London Stone Paving
I'd lean towards 8 bags as well. We use the durgun guns which are really good but its been rightly pointed out on this site that the barrrels on the guns supplied by easipoint are made from standard sized plastic tube which can be cheaply replaced if required
Posted: Tue Jun 28, 2011 4:28 pm
by lutonlagerlout
68mm plastic down pipe
LLL 
Posted: Tue Jun 28, 2011 9:41 pm
by Mikey_C
a company I recently rediscovered close to me (see here), have got some cracking prices on guns, i recently purchased one of the kits for £11.78, with the intention of using it for an epoxy mix which involve throwing when finished, but have yet to use it so can't offer any feed back.
Posted: Tue Jun 28, 2011 10:01 pm
by lutonlagerlout
good find mikey they look very similar to the branded ones
LLL