Page 1 of 1
Posted: Sat Sep 19, 2009 6:50 pm
by bodgeitandscarper
Ive been asked to lay some white granite paving and dont really want to butt joint, would you guys recommend a white mortar joint or do you think its too much as i doubt illl match the colour of the slabs.
Posted: Sat Sep 19, 2009 7:45 pm
by lutonlagerlout
what about white sand mixed with romex patio?
LLL
Posted: Sat Sep 19, 2009 8:25 pm
by Pablo
If the flags are well enough cut then you could lay with a 5mm or smaller joint and point with exterior tile grout which has an infinite no of colours.
Posted: Sun Sep 20, 2009 12:11 am
by bodgeitandscarper
Could you recommend an external grout?
Posted: Sun Sep 20, 2009 11:51 am
by GB_Groundworks
i've used romex with the white sand, goes grey with time. or what about snowcrete to mix your pointing with.
Posted: Sun Sep 20, 2009 12:23 pm
by dig dug dan
easipoint do a white pointing mix, which can be applied using a jointing gun