Beveling limestone edges

[sometimeshandy]

I have a limestone patio with a 7 inch step down on the outside. the top outside edges were saw cut and are sharp. I was wondering if I could use a disk grinder to round these edges down or if it would just make a mess. thanx much.

[Tony McC]

You could, but you should practice on a few offcuts first, as getting an even bullnose is not as easy as it may seem

[DNgroundworks]

I saw a mason doing somthing similar the other day - he was using like a disc/cup diamond tipped attachment on a 4" grinder, He made it look easy!

[seanandruby]

This has been raised before. I think there is some kind of router out there to bevel them.

[bodgeitandscarper]

Could anyone give me some info on this stone router?

[henpecked]

Its called a diamond router Dont know if Im allowed but heres a fleabay link>

Diamond Router

[sometimeshandy]

thanx for the info everyone

[Tony McC]

You can get one from Combined Masonry Supplies (CMS) in Bradford or Harbro International in Darlington.