What a great site,really had a good gander and filled in most of my knowledge gaps.
I have had a look for this problem, but Ive not found it yet.
I have to lay 50m2 of 300 x 300 40mm sandstone flags.
The questions are:
1, If I have teram lying around, is it going to do any good laying it on just a 6:1 base?
2, As I have to lay them individually, whats the best method for ensuring fall/level continuity over a large area? (as I cant screed)
3, Any other pointers as I start tomorrow
use a line/and or a straight edge, terram should be under the subase,spend half a day getting your levels sorted if you rush in you'll end up ripping it up later
good luck
LLL
Thanks
I wasn't sure if it was a string line and level or if you used a boat-level after making sure your base was dead on.
The teram is just lying in the garden, I thought it might be a way of getting rid :;):
No, gave it a full service (should have given it a funeral service instead!) New coil,filter,took head off,cleaned crud out,sparks ok,fuel ok,just wont fire. Not to worry, got my mates wacker in garden, now to work
Just to let you all know I got it going.Iif it helps...this is how i did it,.. whipped off the re-coil cover and put a 19mm socket on the flywheel nut,attached drill and.....va va voom! Away she went, now starts on pull cord alone. :;):
yeah using the drill technique is a lot better than pull starting all day. i've got an old 350cc 2 stroke polaris quad that wont run will start but then over fuels the plug and back fires the exhaust off. had the carb off and to a specialist who ultrasonically cleaned it and all new floats and needle but still doing it. just haven't had the time to play with it, any ideas haha
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
,replaced the coil and plug...any ideas?
