Page 1 of 1
Posted: Mon Mar 02, 2009 11:34 am
by Tony McC
A Leicester-based contractor need to match existing paving on a local project. Here's what is down at the moment....
...any ideas? It's 450x600 and about 40mm thick, pressed concrete.
He thinks it's similar to Eaton's Milford but I'm not sure.
Posted: Mon Mar 02, 2009 4:14 pm
by GB_Groundworks
its similar to a peak riven but they were 600x600, oops and 50mm thick so not them.
Posted: Mon Mar 02, 2009 5:49 pm
by DNgroundworks
Looks very similar to some wyresdale flags that i recentley laid but they were 450x450, but otherwise exact with the straight arissed edges and 38mm thick.
Posted: Mon Mar 02, 2009 6:58 pm
by Tony McC
I thought Wyresdale, but I don't think they get as far south as Leicester.
It's probably a generic mould and may be manufactured by a numebr of companies.
Posted: Mon Mar 02, 2009 7:03 pm
by DNgroundworks
And aslo i enquired about the 450x450 flags i laid about getting them in 450x600 as pictured but the BM's seem to struggle with that request.
Posted: Mon Mar 02, 2009 10:16 pm
by lutonlagerlout
looks like a generic buff riven to me ,the size is unusual but any number of small slab makers might have made this i.e. fencrete or chiltern concrete
LLL