The Brew Cabin

Posted: **Wed Jul 23, 2008 5:34 pm**

Hi,

I need to fit a rotary clothes line in my patio.

should I drill out a hole in the centre of a slab, between two, or four?

Any advice appreciated.

Jon

Posted: **Wed Jul 23, 2008 7:50 pm**

Whatever you do 1,2, or 4 just make sure you've got a good lump of concrete underneath to hold the pole or spike or you'll see your washin flying into the neighbours !

Posted: **Thu Jul 24, 2008 1:13 am**

alternatively use a scaffold tube cut down and drill a pin through the tube and spike when you have set the pole in the ground. You can then remove the line when not in use to give more space.

The Brew Cabin

Rotary clothes line in a patio