The Brew Cabin

Posted: **Tue Jul 22, 2008 12:26 pm**

I have purchased packs of multi sized slabs and expected to find an easy way to produce a random layout, or at least a "random" look. Unfortunately none of the layouts I have found tie in with the sizes and numbers I have. There are 5 different sizes and each pack consists of the following:-

600 x 450 - 1
450 x 450 - 1
600 x 300 - 1
450 x 300 - 2
300 x 300 - 2

Unfortunately I can't buy 600 x 600 to help me out.

Any help finding a suitable layout would be appreciated.

Thanks.

Posted: **Tue Jul 22, 2008 4:32 pm**

how about this?

Posted: **Tue Jul 22, 2008 4:46 pm**

Hi, thanks for the response. The supplier shows three suggested laying options but they all end up as a series of squares, as your suggestion would. Bit of a tricky one as even when you use a random layout generator it is unlikely that you would lay them like that when on site, if you know what I mean.

Bring back the Rubix Cube.....

Posted: **Tue Jul 22, 2008 6:14 pm**

speedie, the gaffer will design a layout for you, wont cost a fortune either. email him your measurements etc. :;):

Posted: **Tue Jul 22, 2008 7:55 pm**

^^ as defined here

The Brew Cabin

Random layout.... - Generator???