Posted: Mon Jun 23, 2008 4:39 pm
a friend has just bought a house and the pavement slabs in the gardens are against an outhouse and also as a path which dont have morter in the gap but sand (previous owner sounds like a lazy so and so)
whats the easiest way to fill the pavement joints as the sand has now been removed. the gap ranges from 3mm-9mm.
the slabs are bradstone weatherdale. the base looks like it has been set on 40 mm concrete with a A semi-dry mix.
is it possible to use rompox easy
is there a way to post a pic of the area needed to be mortared.
thx in advance.
thx Dave_L hope ive done it right
whats the easiest way to fill the pavement joints as the sand has now been removed. the gap ranges from 3mm-9mm.
the slabs are bradstone weatherdale. the base looks like it has been set on 40 mm concrete with a A semi-dry mix.
is it possible to use rompox easy
is there a way to post a pic of the area needed to be mortared.
thx in advance.
thx Dave_L hope ive done it right