Cracks in tarmac - Patching cracks in tarmac
-
- Posts: 2
- Joined: Fri Apr 28, 2006 2:14 pm
- Location: Huddersfield
My house is at the end of a 300m single track access road for which my neighbour and I are responsible for maintenance. It was re-tarmac'd about 3 years ago.
However it is set on a hillside and there has been some slight subsidence causing cracks to appear in one area. Max width of the largest cracks is about 10mm at the surface, depth maybe 20mm. They run for 2-3 metres.
I have no issue with the original contractor (its a long story, but it was paid for under my neighbour's insurance), I would just appreciate some advice on how to patch the cracks to help stop them getting any bigger, water, frost and weeds getting in etc. It is unlikely that there would be any more subsidence and as they are up the road away from the house it is ok for the repair to show, though obviously I would like to minimise the effect.
Appreciate any advice given. Thanks.
However it is set on a hillside and there has been some slight subsidence causing cracks to appear in one area. Max width of the largest cracks is about 10mm at the surface, depth maybe 20mm. They run for 2-3 metres.
I have no issue with the original contractor (its a long story, but it was paid for under my neighbour's insurance), I would just appreciate some advice on how to patch the cracks to help stop them getting any bigger, water, frost and weeds getting in etc. It is unlikely that there would be any more subsidence and as they are up the road away from the house it is ok for the repair to show, though obviously I would like to minimise the effect.
Appreciate any advice given. Thanks.
PG
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
Are they getting worse or have they stabilised (the cracks, that is)?
If they aren't getting any wider, a simple 'repair' would be to fill the crack with cold pour jointing compound. This will just keep out the water and the weeds, but will not 'glue' the two sections of bitmac back together.
The 'proper' repair would involve cutting out a section of the surface centred on the crack with around 300mm spread to either side, and then resurfacing the excavated section, which is probably a bit OTT at this stage.
If they aren't getting any wider, a simple 'repair' would be to fill the crack with cold pour jointing compound. This will just keep out the water and the weeds, but will not 'glue' the two sections of bitmac back together.
The 'proper' repair would involve cutting out a section of the surface centred on the crack with around 300mm spread to either side, and then resurfacing the excavated section, which is probably a bit OTT at this stage.
Site Agent - Pavingexpert
-
- Posts: 2
- Joined: Fri Apr 28, 2006 2:14 pm
- Location: Huddersfield
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
-
- Posts: 219
- Joined: Fri Jan 23, 2004 9:55 pm
- Location: Florida, USA
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
-
- Posts: 219
- Joined: Fri Jan 23, 2004 9:55 pm
- Location: Florida, USA
That's why I prefer cats...a big fluffy moggy waiting inside who hates to get her feet wet or soiled. I can just picture you, Tony, all curled up on the sofa watching footie with a great furry cat plunked on your lap! :p
Pity hubby's allergies won't let us have any four-footed critters in the house, save the lizards who sneak in whilst the patio doors are open. :rock:
Pity hubby's allergies won't let us have any four-footed critters in the house, save the lizards who sneak in whilst the patio doors are open. :rock:
Tarmac Lady
Well-behaved women rarely make history.
Well-behaved women rarely make history.
-
- Posts: 1136
- Joined: Sun May 08, 2005 9:25 am
- Location: North West
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
-
- Posts: 219
- Joined: Fri Jan 23, 2004 9:55 pm
- Location: Florida, USA