Grouting advice pls

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
Post Reply
flock67
Posts: 4
Joined: Wed Mar 07, 2007 2:59 pm
Location: london

Post: # 16844Post flock67

Hi, new user here looking for some help. two pronged question actually. i'm going to be laying a sandstone patio, and as it's my first time ever, it's probably gonna take me a while - especially as i only have weekends and i'm laying 38sq m. My question is this - do i need to start grouting every 2-3 days despite only having laid a small area? will there be a difference in the grout colour if it's done on different days, or can i just grout the whole lot when i'm finished - probably about a month!

Sorry sorry sorry - i mean pointing!!

My second question is to do with bedding mixes - i have looked on the site and can't find the answer. i'm laying on an existing concrete base - do i still use a 4:1 mix, or is it something else.

Many thanks for taking the time to read - hope someone can help.

Stephen

Stuarty
Posts: 637
Joined: Sat Mar 18, 2006 7:35 pm
Location: Edinburgh

Post: # 16846Post Stuarty

I think you would be better pointing it in one go, you more times you make up different batches, the more likely they will be slightly different, resulting in different shades of gray.

Id still use a 4:1 :)

flock67
Posts: 4
Joined: Wed Mar 07, 2007 2:59 pm
Location: london

Post: # 16849Post flock67

Many thanks for that, much appreciated. At least I now know where I am going!

flock67
Posts: 4
Joined: Wed Mar 07, 2007 2:59 pm
Location: london

Post: # 16861Post flock67

sorry - been having a think about this. Is it not a problem that if i leave the pointing any longer than 3 days, then the bedding mix will have gone off, and my pointing will have nothing to bond to? i understand your advice from the point of view of using the same batch for pointing consistency, but is this more important than pointing before the bedding mix goes off - apologies for still being confused!

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 16863Post lutonlagerlout

it all depends what type of bedding mix you are using,
stuarty is right best do all the pointing in 1 hit be it 3 hours or 3 days later
dont leave it too long or you will get water in the joints which will noise up your pointing
cheers LLL :)
"what,you want paying today??"

YOUR TEXT GOES HERE

Rich H
Posts: 884
Joined: Thu Feb 08, 2007 12:28 pm
Location: Reading

Post: # 16866Post Rich H

As you are likely to be doing this over a long period of time, the joints will get grubby and (as people do) people will walk on it and risk popping the bond of the slabs.

If you have a leaf blower, it's ideal for clearing out the joints before you start. You don't want dust, soil, leaves, insects etc in there.

Don't worry about the bedding layer going off. If you push the semi-dry pointing mix in nice and hard (it should take ages if you are doing it properly) it will go off a treat. Good luck, laying sandstone for the first time is a bit of a learning experience!

SUE @ EASIPOINT
Posts: 26
Joined: Tue Jul 12, 2005 1:10 pm
Location: Lancashire

Post: # 16867Post SUE @ EASIPOINT

Hi

Suggest you look at our website www.easipoint.co.uk.
The pointing material is factory blended, packed in 25kg sacks, needing only the addition of water. so the mix will be the same colour every time.

The gun application also speeds up the process!

Sue
Sue
Easipoint Ltd - www.easipoint.co.uk
Tel: 01257 224900

flock67
Posts: 4
Joined: Wed Mar 07, 2007 2:59 pm
Location: london

Post: # 16885Post flock67

Brilliant - thanks to all of you. the paving arrived today, and i started asking myself if i was mad or not. sure it'll be fine though. thanks again.

Post Reply