Page 1 of 1

Posted: Mon May 22, 2006 10:26 pm
by Thom
Hi,

Im really sorry if this has been covered before but I have had a look and cant specifically find exactly what I would like to know.

I have just finished laying 17m2 of Indian Sandstone (Autumn Brown) in our kitchen and pointing them on my hands and knees (ouch!). Now it has come to the point where I want to seal the flags to protect them against oil and food spillages but I want as little as a shine as possible. I understand most products will change the appearence but I dont want a shiney finish.

What product is going to best for me?

I went to my local builders yard and they only had the resiblock with a "wet look" finnish which I dont want?

Anyway if you can help at all that would be fantastic!

Excellent site by the way, I have read all the info I needed to lay and point so far from here!

Posted: Tue May 23, 2006 2:07 pm
by Tony McC
Resiblock isn't suitable for Indian sandstone - it's manufactured specifically for concrete block paving. Have a look at the Lithofin range. The Colour Enhancer MN is probably what you want.

Posted: Tue May 23, 2006 2:10 pm
by Thom
Cheers Tony, much appreciated!

:)