The Brew Cabin

Posted: **Mon Apr 03, 2006 4:56 pm**

Hi There,
With the help of this site I'm nearly ready to complete my first paving project.
Problem is I don't know how much mortar I will need for the joints!
I don't want to order too much and end up with loads left over, but then again I especially don't want to order too little so I can't finish the job!

The patio is approx 3m x 4m, with random sized flags (patio will be constructed using two of these kits:)

Joints will be approx 10-30mm wide

Any idea how much I will need to order?

Also, can anyone recommend a good supplier of black dyed mortar mix in the Leeds / W. Yorks area ?

Thanks for any advice

Posted: **Tue Apr 04, 2006 8:54 am**

Hi

If you let me know the depth of the joints I can work out quants for you and also put you onto a supplier of Black Easipoint in Leeds.

Sue

Posted: **Wed Apr 05, 2006 5:57 pm**

If you want to mix your own pointing mortar, then for 12 square metres of that type of paving...

Washed Building Sand 60Kg approx
Ordinary Portland Cement 1 bag @ 25Kg (use 15kg)
Optional Mortar Dye 1 Kg

...there are too many variables with riven stone (and even with riven-effect concrete) flags to be accurate, but the above 'recipe' is usually correct to within 10kg

The Brew Cabin

Quantity of mortar mix - How much do i need to order?