The Brew Cabin

Posted: **Tue Sep 13, 2005 6:38 pm**

does anyone know of an attachment for a mini digger that will grab these heavy slabs and allow me to lay a long straight path.
Bearing in mind they will be laid so the path is 900 wide, therefore they need to be grabbed on the long side.

Where can I hire such a tool if available?

thanks

Posted: **Wed Sep 14, 2005 12:41 pm**

Could you use the same technique as for kerbstones, and use binding straps?

Posted: **Wed Sep 14, 2005 4:46 pm**

the only problem with that is that you still have to lift the slab to get the straps underneath, and there is a risk of the slab slipping if it is not spaced evenly.

Posted: **Thu Sep 15, 2005 2:14 pm**

Email me, Dan, and I'll send you some addresses.

The Brew Cabin

600 x 900x 50 hydraulic pressed slabs - Laying about 120 as a path