The Brew Cabin

Posted: **Thu Jun 02, 2005 2:55 pm**

Hi,

I have a simple need to cost some work for advanced planning and budgeting purposes. Can anyone tell me ball-park (range from lowest to highest will do) per metre prices for all inclusive (time and materials and VAT) decking versus paving?

I realise that it's not that simple but I assume that quantity surveyors use such guidelines for example and that's all I need. The materials I would use would be at the higher levels of cost e.g. hardwood decking or near top quality stone flags.

Many thanks in anticipation.

Kind Regards

paul

Posted: **Thu Jun 02, 2005 9:13 pm**

Typical costings for various types of paving can be found near the bottom of the main pages dealing with each type of paving on the main website. So: if the "paving" you wish to compare is, say, block paving, then look up the costing table at the base of the block paving page: if it's stone flags, then look at the stone flags page.

The page that deals with decking does not include costings because the feedback I received was so variable, I could have written that typical priced range from 3-300 quid per square metre, which is pretty meaningless as far as I'm concerned.

Posted: **Fri Jun 03, 2005 9:26 am**

thanks very much- most helpful sir.

The Brew Cabin

Simple question - Pricing