Posted: Mon Apr 25, 2005 9:14 pm
What a cracking website!
The project is a 7m by 4 m paved area (my first), upon which we are going to place a couple of sheds. It's surrounded on 3 sides by fencing, the front section by lawn.
Intend to lay pavers (450) on a 2" semi-dry 1:10 bed, with a bit of compacted limestone below to even things out. Does that sound o.k so far?
I'm not sure as to whether some form of edge support is needed? I thought maybe some tanalised timber, say 1" by 4", held by pegs. This could then be left in place?
Any suggestions/confirmation would be appreciated. Hope to start this weekend!
Regards
Boggy
The project is a 7m by 4 m paved area (my first), upon which we are going to place a couple of sheds. It's surrounded on 3 sides by fencing, the front section by lawn.
Intend to lay pavers (450) on a 2" semi-dry 1:10 bed, with a bit of compacted limestone below to even things out. Does that sound o.k so far?
I'm not sure as to whether some form of edge support is needed? I thought maybe some tanalised timber, say 1" by 4", held by pegs. This could then be left in place?
Any suggestions/confirmation would be appreciated. Hope to start this weekend!
Regards
Boggy