Posted: Sun Nov 27, 2005 7:21 pm
Superb for jointing setts - best polymeric I ever seen but, as you say it isn't cheap. However, I have been assured by no-one less than the MD of Romex in Germany that the UK price is competitive with a certain shitey rival that has been berated in the Brew Cabin on many previous occasions.
The Romex is supplied in 25kg tubs, whereas the shitey alternative comes in 20kg packs. When costed out kilo for kilo, there should be almost nothing between them. The UK agent has structured prices ensure they offer value for money.
The biggest diff between Romex and the shitey alternative is that Romex binds to the paving, creating a firm and stable joint, whereas the other jollop only binds to itself and therefore forms a 'plug' within the joint rather than sealing the joint effectively. Further, the Romex doesn't go greeny-black with algae and lichen the minute your back is turned.
I've been following installations of Romex for the past 15 months and it's all been positive. So much so that I've invited the manufacturer to sponsor a feature page on the website for next year, as I honestly believe it is a superb jointing option for decorative or prestige sett work.
Try to calculate how much it costs in time and materials to joint setts using other materials. Obviously, a slurry mortar wet grout is cheaper and just a bit slower, but it's nowhere near as clean and tidy. Pitch is considerably slower, and traditional pointing is mind-numbingly slow.
Assuming you're laying cubes, or setts just 100mm deep, you can fill the joint to half depth with a dry or semi-dry sand/cement mix, press it down into the joints and then top-up with the Romex, to ensure you get as much coverage as poss.
John Ecky, who you met at the Karting Night, has just used it on a job in Rochdale and I'm hoping to hear how he got on with it some time this week. I had wanted to photo and document the installation but I was still in that bloody London dump when he did it, so, if you decide to give it a go, I'd be really keen to photo-shoot the job.
The Romex is supplied in 25kg tubs, whereas the shitey alternative comes in 20kg packs. When costed out kilo for kilo, there should be almost nothing between them. The UK agent has structured prices ensure they offer value for money.
The biggest diff between Romex and the shitey alternative is that Romex binds to the paving, creating a firm and stable joint, whereas the other jollop only binds to itself and therefore forms a 'plug' within the joint rather than sealing the joint effectively. Further, the Romex doesn't go greeny-black with algae and lichen the minute your back is turned.
I've been following installations of Romex for the past 15 months and it's all been positive. So much so that I've invited the manufacturer to sponsor a feature page on the website for next year, as I honestly believe it is a superb jointing option for decorative or prestige sett work.
Try to calculate how much it costs in time and materials to joint setts using other materials. Obviously, a slurry mortar wet grout is cheaper and just a bit slower, but it's nowhere near as clean and tidy. Pitch is considerably slower, and traditional pointing is mind-numbingly slow.
Assuming you're laying cubes, or setts just 100mm deep, you can fill the joint to half depth with a dry or semi-dry sand/cement mix, press it down into the joints and then top-up with the Romex, to ensure you get as much coverage as poss.
John Ecky, who you met at the Karting Night, has just used it on a job in Rochdale and I'm hoping to hear how he got on with it some time this week. I had wanted to photo and document the installation but I was still in that bloody London dump when he did it, so, if you decide to give it a go, I'd be really keen to photo-shoot the job.