Page 1 of 1

Posted: Thu Jun 13, 2002 5:09 pm
by 71-1093879310
Hi All,
I am having a bit of a problem sorting out the nominal sizes of these slabs as the sizes quoted in the Stonemarket catalogue includes a jointing dimension. Tony, have you ever used these and do you know by what amount their actuall size differs from the advertised size?
Thanks again

Posted: Mon Jun 17, 2002 10:51 am
by 84-1093879891
Hi Greig,

the actual size is Imperial, ie, 24" x 24", rather than the usual metric (which would be 600x600mm)

It's 2 or 3 years since I last worked with these, but I've seen nothing from Stonemarket (who still don't have a website!!) to indicate they have altered this silly practice.

HTH


Posted: Tue Jun 18, 2002 8:14 am
by 71-1093879310
Thanks. I will work on the imperial size converted to the nearest 5mm. ie 24"x24" (609.6x609.6) = 610x610.

Posted: Tue Jun 18, 2002 12:27 pm
by 84-1093879891
Given the so-called riven edges of these flags, 610x610 should be fine. :)


Good Luck!

Posted: Sun Feb 13, 2005 12:11 am
by the manager
these are the standard sizes we manufacture
310x310
465x310
465x465
620x310
620x465
620x620
775x465
775x620
775x775
930x620