Page 1 of 1

Posted: Fri Apr 02, 2004 4:19 pm
by Mark79
hi,

this weekend i will be laying my new patio :D


ive dug down about 4 inch and thats about as far is as is possibe due to the very compacted builders rubble.

im not going to lay a sub base as the ground is so hard it would make no difference as far as i can tell.

the patio dimensions are 3.6m x 3.6m (12' x 12'),

im using (64) 450x450x32mm slabs to form a square, (8x8 slabs)

(2 tons of sharp sand and 5x 25kg bags of cement,)

now is the best method, screed bedding then Dry grouting the whole patio?


Posted: Fri Apr 02, 2004 6:23 pm
by 84-1093879891
Yes, if they are pressed flags (which they may well be, from the sound of it)

I reckon you'll have some sand left over. :)

Posted: Fri Apr 02, 2004 6:29 pm
by Mark79
cheers,

yep they are pressed flags, made by RMC i think.

i need a little extra sand to do a path along the side of my drive way.

19' x 2'

so the extra sand will be used there :D

Posted: Fri Apr 02, 2004 7:05 pm
by 84-1093879891
Let us know how it goes!

Posted: Fri Apr 02, 2004 9:06 pm
by Mark79
will do..

hopefully it will look good :)