Page 1 of 1

Posted: Wed Aug 13, 2003 3:16 pm
by wjc
How would i create a patio 30 cm higher then ground level ?Not near any dpc.

Posted: Wed Aug 13, 2003 5:28 pm
by 84-1093879891
By building up the levels using sub-base material, with a low retainer to keep everything in place.

Posted: Wed Aug 13, 2003 6:10 pm
by wjc
Would that be class 1 stone or could fill with half soil

Posted: Wed Aug 13, 2003 7:39 pm
by wjc
Size 3.6 x 3.6.Retainer would thay be single brick or double and could use concrete blocks instead single or double.How deep to make foundation.cheers

Posted: Thu Aug 14, 2003 2:12 pm
by 84-1093879891
I really can't tell you exactly how to build your own patio. I can give you the basics, and I can explain why things are done in a particular way with particular materials, but I can't tell you what type of retainer to use or how deep to dig the footings as I have never seen your plot and am not familiar with the exact layout.

The retainer can be brick, or an edging kerb, a flag-on-edge, a timber edging or old setts or anything you want - you only have 300mm of lift so you're spoiled for choice. If you want to use bricks, I would use 225mm engineering brickwork on a 450x100 concrete foundation at a depth of not less than 150mm, but, fo only 300mm of lift, that seems like a lot of work to me.

For the fill, you should only use inert material, so no soil. DTp1 is the best material, but you could use gravel, all-in ballast, crusher run or lean mix concrete if you preferred.

You need to come up with a plan for this patio before you start work. All the questions you might have are answered on the main site, but it involves you making decisions on what you want it all to look like once it's finished, how confident you are with your own skills, and how much you're prepared to spend. I can't take these decisions on your behalf.

Posted: Thu Aug 14, 2003 3:50 pm
by wjc
Cheers not planning to do it yet.Just getting some insight into what will be required.One last question would i get away with single brick to keep it all in.

Posted: Thu Aug 14, 2003 7:31 pm
by 84-1093879891
Yes, but it's less than ideal. If you're going to use brickwork, you might as well use a double skin as there's sod-all strength in a single skin.