Hi
I have a brick wall contained area of 19.2 sq mtrs and 350mm high, on top of which, I want to lay a new slab patio. My question is please describe the materials and depths required to bring the level up to the top of the wall ready for the slabs.
Regards
Andy & Glenda Pettican
Flags And Slabs
-
84-1093879891
All this information is already on the Patio Paving page - any make-up in levels is always done with sub-base material, either granular or CBM3.
Assuming you have a 50mm thick flag, then you need 50mm for the flag, 35-50mm for the bedding, and the rest is DTp1 or CBM3 compacted in layers of not more than 150mm depth.
Assuming you have a 50mm thick flag, then you need 50mm for the flag, 35-50mm for the bedding, and the rest is DTp1 or CBM3 compacted in layers of not more than 150mm depth.