The Brew Cabin

Posted: **Wed May 01, 2019 10:29 am**

Hello all, I am looking at a 2 part resin based jointing system and I am looking for experience or advice. I was going to consider the VDW 850 by GFTK but someone has suggested Resiply (based on price). Has anyone used Resiply and what are the thoughts on its quality?
It is for a patio and driveway and I want the usual qualities (frost, weed jet wash resistance) and don't mind paying a bit extra if the quality is significantly different. I can't find many reviews on Resiply however. Grateful for any help. Thanks

Posted: **Thu May 09, 2019 5:14 pm**

Resiply is OK but I think even John, the owner, would admit he's not in the quite the same league as the German manufacturers such as GftK. However, for a light-use residential project that is well laid with suitable joint widths and (very importantly) depths, I wouldn't worry too much at using Resiply if the budget was tight.

Posted: **Thu Jul 04, 2019 7:55 am**

Hi Craig,

I would be interested in what you decided to use and what the end result was in the end??

Over the next few days I will be re-pointing about 60m2 of Black Limestone patio.

I too was looking at Resiply having spoken to John (the Owner of Resiply) and thought i would give it a whirl.

Jonny

Posted: **Thu Jul 11, 2019 9:37 am**

Yes - it would be useful to get feedback on whatever products either of you used.

The Brew Cabin

Resin based jointing - Wondering which 2 part system to choose