Page 1 of 2
Posted: Wed Nov 16, 2016 8:43 pm
by Forestboy1978
Hi guys,
Basically I often have to do a length journey as I haven't the exact right dimensions on a piece of timber. Like for example needing to make a 4x2 into a 35mm x 2 inch or something similar.
I'm in the market for a table saw or band saw as I will be buying a large trailer for doing such activities. I can't really figure out which is best.
I am leaning towards a bandsaw cos nearly all my work is first finish stuff and I have a planer to tidy cuts and there is the safety aspect. I'm quite confident in myself but there will be others using this machine and I'd like to keep the catastrophic ***k up factor down to a minimal.
Anyone have an opinion on this?
Posted: Wed Nov 16, 2016 8:52 pm
by digerjones
Why not get a chop saw that flips over into table saw
Posted: Wed Nov 16, 2016 8:57 pm
by Forestboy1978
digerjones wrote:Why not get a chop saw that flips over into table saw
say what??
Never knew they could do that. I already have a good mitre saw though but will research.
Ta
Posted: Wed Nov 16, 2016 9:00 pm
by Forestboy1978
Oh you mean a circular?
My circular wouldn't do the depth of cut that I require which is 4 inches. I doubt many circulars cut that deep. I did look into a bigger circular but I want cordless. That said if it's mainly for the trailer it could be corded I guess.
Posted: Wed Nov 16, 2016 9:26 pm
by digerjones
A good circular saw will cut 2'', turn timber over cut another 2''. You could also get a battery operated one.
Posted: Wed Nov 16, 2016 9:33 pm
by Forestboy1978
digerjones wrote:A good circular saw will cut 2'', turn timber over cut another 2''. You could also get a battery operated one.
OMG I'm such a retard..
I've got a good circular that does nearly 3 inches. It just hadn't occurred to me to do that... in all these year.. sheesh. Well done. I feel stupid lol
Posted: Wed Nov 16, 2016 11:27 pm
by digerjones
You couldn't see the wood for the trees. Not sure about your trailer being as versatile as you think. In my mind, if you think your going to work in it, I doubt it. If you had a saw bench in it you wouldn't get the timber in it. Just buy a gazebo. With a enclosed trailer your restricted to how much garden waste you can get in it.with open trailer, pick up you can pile it as high as you want and then pull it down with rope and hitch knots or if amateur ratchet straps.
Posted: Thu Nov 17, 2016 8:21 am
by Forestboy1978
mainly for mitre saw and digger or easy moving of mixer, compactor etc and a place to sit at lunch time.
Posted: Thu Nov 17, 2016 6:03 pm
by michaelthegardener
id say you could lose a finger just as easy on boath types of saw myself :p a band saw is great but sometimes not overly accurate on long cuts I find but not sure what you mean about the trailer do you want to use it in there because my workshop is 3m by 7 and if I want to cut a long length I have to move the saw to the middle or to by the door and work from outside if u see what I mean so I cant see you getting on to well in a trailer 
Posted: Thu Nov 17, 2016 8:06 pm
by Forestboy1978
No you bunch of plums. I mean have it at the back and have the timber lengths hang out of the rear of the trailer for chopping. It should work.
Even so, it's just damn useful for digger, dumper and also keeping my waste separate. Tired of having to unload tons of tools and bags of green waste and wood from the top of a pile of dirt to then get re weighed and put it all back on etc.
Posted: Thu Nov 17, 2016 10:13 pm
by digerjones
How come you have to empty everything to weigh some waste.
In my world, drive on weighbridge. Chuck crap off drive on weighbridge
Posted: Fri Nov 18, 2016 8:55 am
by mickg
you are combining two separate items here which in my opinion does not work
one is clean work cutting timber etc and the other is a digger or dumper covered in mud inside the same trailer
as already mentioned you need a heavy duty gazebo to keep the power tools dry and somewhere to sit if required, we sit in the van or on a wall or pack of block if its dry and that's never been a problem
I have looked at buying a similar trailer for all the hand and power tools but I would still have my plant trailer for moving the digger or dumper to and from site
Posted: Fri Nov 18, 2016 8:46 pm
by Forestboy1978
What about using it in the meantime to move small plant around and stump grinder, mowers etc and later down the line get an 8 x 4 ft plant trailer and I'll still have it to move fence panels or the odd bulk bag or whatever whilst my truck is full of crap or tied up with moving crap about and also some tools and as an electric source from the truck if I get it hooked up for power?
I think it'll be a good advert also if I get it sign written as it'll be so damn noticeable....
There's just a million uses for it...
Posted: Fri Nov 18, 2016 9:38 pm
by digerjones
Suppose you have to think how many other outfits you see with a box trailer. There was one farther and son team round here that had one, they also had a plant trailer though.
Posted: Sat Nov 19, 2016 8:07 am
by Forestboy1978
digerjones wrote:Suppose you have to think how many other outfits you see with a box trailer. There was one farther and son team round here that had one, they also had a plant trailer though.
That's the thing,, not many. That's why I'm questioning it.
In the U.S it's the done thing though. Most people tow one with a pick up..
Not sure why it's so different over here. Perhaps smaller roads etc.