Page 1 of 1

Posted: Tue Sep 13, 2016 6:44 pm
by msh paving
bobcat E10 280hr ex demo unit, has 1.5t machine engine and uses 1.5t buckets 700mm wide to 1100mm, superb machine

Image[/IMG]

Image[/IMG]

new muck truck, 2 in the fleet now
Image[/IMG]




Edited By msh paving on 1473788732

Posted: Tue Sep 13, 2016 7:32 pm
by rxbren
how do you rate the little muck trucks?

Posted: Tue Sep 13, 2016 7:50 pm
by msh paving
a great tool, cant fault them. i just paid £600 for that and the ramp its about 10 years old and done little work been stood in barn MSH :)

Posted: Tue Sep 13, 2016 9:53 pm
by rxbren
thats a bargain ive been looking but not found any under 1k on their own let alone with the ramp

Posted: Tue Sep 13, 2016 11:40 pm
by lutonlagerlout
nice one Mark!
LLL :)

Posted: Wed Sep 14, 2016 6:58 am
by Donk
those little trucks are not too shabby, we had one for shifting hardcore. it takes 3 builders barrows. pikeys robbed it though.

If i was to get another I think i would go tracked and hi lift to save messing around with ramps.

How do you rate the bobcat ? What engine are they ? Never seen one round our neck of the woods, all kubota even though JCB is on the doorstep.

Posted: Thu Oct 27, 2016 3:25 pm
by Captain Concrete
Bobcats are really Doosans and are very decent, 2nd hand value not as good as Kubota or Takeuchi.

Posted: Thu Oct 27, 2016 7:19 pm
by msh paving
bobcat are owned by doosan, but made in there own factory in north dakota and the cz republic, one or 2 parts are similar but thats it, a e26 does not compare to a dosan 2.6t machine

Posted: Wed Nov 09, 2016 6:01 pm
by Pablo
I've hired one of those diggers a fair bit recently, there's a few bits I'd take an angle grinder too and the drive motor hoses are very exposed but other than that it's easily the best I've used (which is basically all of them). :)