Dead blow hammer

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
Post Reply
KAMIKAZEE DIY
Posts: 139
Joined: Thu Feb 27, 2014 8:45 pm
Location: Scotland

Post: # 108625Post KAMIKAZEE DIY

Can you use a dead blow hammer to lay paving slabs or would it likely break them?

Cheers
Cheers
Top
msh paving
Site Admin
Posts: 1854
Joined: Tue Aug 19, 2008 7:03 pm
Location: kings lynn norfolk
Contact:
Contact msh paving

Post: # 108630Post msh paving

been using one for years, never use rubber mallet they bounce to much,
3lb dead blow everytime MSH :)
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk
Top
GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:
Contact GB_Groundworks

Post: # 108645Post GB_Groundworks

use both but a dead plow tends to mark more and break more and if you hit your hand boy does it hurt
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com
Top
Post Reply

Return to “Tools and Plant”